13
After starting the truck by turning on the key switch (4), move the tiller to the operating zone (‘F’, fig.13).
Turn the accelerator button to the desired direction forward ‘Fw.’ or backwards Bw.’(fig. 13).
Control the travelling speed by moving the accelerator button (18) carefully until you reached the desired
speed.
If you move the accelerator button back to the neutral position, the controller decelerates the truck until
the truck stops. If the truck stopped, the parking brake will be engaged.
Drive carefully the truck to the destination. Watch the route conditions and adjust the travelling speed
with the accelerator- button.
e.
Steering
THE TRUCK IS EQUIPPED WITH AN ELECTRIC STEERING SYSTEM. TAKE CARE BY
OPERATING THE TRUCK; THE BEHAVIOR OF THE TRUCK MIGHT BE DIFFERENT THAN
TO A TRUCK WITHOUT ELECTRIC STEERING SYSTEM.
You steer the truck by moving the tiller to the left or right side.
f.
Braking
THE BRAKING PERFORMANCE DEPENDS ON THE TRACK AND LOAD
CONDITONS OF THE TRUCK
The braking function can be activated on several ways:
By moving the accelerator button (8) back to the initial ‘0’ position or by releasing
the button, the regenerative braking is activated. The truck brakes until it stops.
By moving the accelerator button (8) from one driving direction directly to the
Fig. 13: Operating direction
