18
27 Check the battery voltage
28 Clean and grease the terminals and check for corrosion and damage
29 Check the battery housing for damages
30 Check and if necessary refill the battery with distillated water
Charger
31 Check the main power cable for damages
32 Check the start-up protection during charging
Function
33 Check the horn function
34 Check the air gap of the electromagnetic brake
35 Test the emergency braking
36 Test the reverse and regenerative braking
37 Test the safety (belly) button function
38 Check the steering function
39 Check the lifting and lowering function
40 Check the tiller arm switch function
General
41 Check if all decals are legible and complete
42 Inspect the castors, adjust the height or replace these if worn out.
43 Carry out a test run
b.
Lubricating points
Lubricate the marked points according to the maintenance checklist. The required grease specification is:
DIN 51825, standard grease.
1. Gear
box
2. Caster
bearings
3. Load
wheel
bearings
4. Hydraulic
system
5. Joint
Fig. 17: Lubricating points PT 27R
Fig. 18: Lubricating points PT 36R
