23
figure 2-31
(5) Adjusting brake switch as figure 2-32
(a) After adjusting brake pedal height,release lock nut of brake switch
(b) Pull off plug to separate wire
(c) Rotate switch to make clearance into A=1mm
(d) To be sure when step pedal down, the light of brake shall be open.
(e) Tighten the nut.
figure 2-32 braking light button
2.8 Malfunction and cause See List 2-3
List 2-3
Malfunction
Cause
Elimination
1 Brake system leakage
Repair
2 Clearance of brake hoof is not ok
Regulate adjustor
3 Brake is too hot
Check if skid
Pedal
Push rod
Bolt
