65
(b) Backing forklift for distance of 1
／
4 length of
fork.
(c) Lift fork 50—100mm up and drive forklift forward for stacking to be optimum.
(8) Look at rear space, backing forklift in order to avoid impact between fork and pallet or goods.
(9) Ensure fork prong to be off goods or pallet, lower fork to avail driving.(from ground
150—200mm)
11
．
Unstacking
Unstack referring to the procedure as below
(1) Slow down when close to goods.
(2) Park in front of goods(30cm between goods and fork prong)
(3) Adjust the vehicle position in front of goods
(4) Be sure that there is no overloading.
(5) Adjust the Mast upright to ground.
(6) Observe the vehicle position and move it forward until the fork inserts the pallet completely
·When it is difficult to insert the fork completely into
pallet
：
(a) Inserting 3
／
4 length of fork and lift pallet little more
(50
－
100mm), then pull fork out pallet 100-200mm,
then lower pallet.
(b) Insert fork into pallet completely.
(7) After fork insert pallet, lift pallet (50-100mm) up.
(8) Look at ambient spacy to move forklift backward to lower
load.
(9) Lower load at the height of 150-200mm from ground.
(10) Tilt backward the mast to ensure the stability of goods.
(11) Transport the goods to destination
12 Deposit
(1) Before diposit
Before forklift deposits,clean it thoroughly, check up as
following:
(a) If necessary, clean grease and oil of bodywork by cloth
and water.
(b) When cleaning, check the vehicle entirely especially for hollow or damage of bodywork, if
tires punctured, and if there is any nail or stone in tire surface groove.
(c) Check for leakage.
(d) If necessary, infuse greese.
(e) Check wheel hub nut and joint face between piston rod and piston for loose, check piston
rod surface for injury.
(f) Check mast roller for rotation stability.
(g) Actuate lift cylinder to its max. height to let cylinder be full of liquid.
·As long as there is any failure or malfunction or unsafe factor of forklift to be
known,report to related person and stop using forklift until repaired.
(2) Daily deposite
(a) Parking forklift on appointed place and block wheel by wedge.
(b) Put shift gear on neutral and actuate parking brake.
(c) Take off ignition key and keep it in safe area.
(3) Long time deposite.
Based on daily deposit,please make check and maintenance according to the follow items.
(a) Considering the raining season, park the vehicle on high and rigid ground.
(b) Unload battery from forklift.even indoor parking,if the place is muggy,dry and shade-cool
are necessary fo the battery depositing. Charge the battery once a month.
