93
(10) Check tires (pneumatic tires)
Unplug the nozzle cap, measuring tire pressure with a tire air pressure. After check air
pressure, nozzle mouth should ensure that gas will not leak before installed the cap.
·Forklift tire pressure is higher than the car’s; it should not exceed the prescribed
pressure value.
Check tyre
(
solid tyre
)
Check if there is dilapidation or leakage on tyre and its sides,and if there is deformation or
damage in wheel rib and locking collar
(11) Check wheel nut
·Wheel nut loosening is very dangerous, if loose, the
wheels may fall off, resulting in vehicle flip. Check the availability
of loose wheel nut, it is very dangerous even one of them is
loose, so be screwed to the provisions of pre-torque value.
Wheel nut tightening torque
Front wheel
:
6.50-10-10PR 130-150N.m
23X9-10-18PR 280-320N.m
23X10-12-18PR 280-320N.m
Rear wheel
:
5.00-8-10PR 130-150N.m
18X7-8-14PR 130-150N.m
200/50-10PR 130-150N.m
(12) Check charge condition
Measuring the proportion of battery, when converted to 30
℃
, the battery proportion from
1.275 to 1.285, indicating the battery is fully charged, and check whether the terminal block is
loose, and whether the cable is damage.
(13) Check headlights, turn signals and horn
model
tyre pressure
fore tyre
6.50-10-10PR
1.0MPa
23×9-10-18PR
1.03MPa
23×10-12-18PR
1.03MPa
rear tyre
5.00-8-10PR
0.9MPa
18×7-8-14PR
0.9MPa
200/50-10PR
0.9MPa