85
(2) Precautions before maintenance
·No smoking
·Wear all protective equipment (helmets, shoes, glasses, gloves and boots), and
suitable clothing.
·Wipe out the oil in time.
·When add lubricating oil, you should clean out dirty oil or dust with a brush or cloth,
then add oil.
·In addition to the needs of some cases, should turn off the key switch and pull the
battery plug out.
·Lower the fork to ground when maintaining.
·Clean the electrical components with compressed air.
(3) Matters need attention.
·You should be careful not to put your feet under the decensive fork, do not be tripped
over by fork.
·When fork is lifted,place cushion block or other object under inner mast to prevent
fork and mast from falling down suddenly.
·You should be careful when you open and close the noseplate and cover plate of
battery.
·When you can not finish your work in one time,please make mark and go on next
time.
·Use the right tools, do not use makeshift tools.
·Because of high pressure hydraulic circuit, do not carry out maintenance work
before reducing the internal pressure oil-way.
·When shocked by high-voltage,search for medical treatment immediately.
·Do not use the door frame assembly as a ladder.
·Strictly forbidden to put your hands,feet and body
between frame and door frame assembly.
(4) Inspect and replace tires.
·Assembly and disassembly of tires must be operated
by professionals.
·High-pressure air should be carried by professional.
·Wear goggles when using the compressed air.
·When disassemble tires, do not loose rim junction
bolts and nuts, there is high-pressure gas inside the tire,
bolts, nuts and rims loose cause very dangerous situation.
·Junction disassembly rim bolts and nuts, the tire must be exhausted within the high
pressure gas, and carried out special tools.
(5) Use jack (replacement of tyres)
·When lift the forklift truck with a jack, do not bore into the botton of forklift.
·
Before lift the forklift truck with a jack, ensure there is no person or load on the truck.
·When forklift is of ground,stop using jack and put pad under it to prevent it from
falling down
·Before lift forklift with jack,affirm there is nobody and no load on it
(6) Emission (electrolytic liquid, oil, etc.) requirement.
·Forklift scrapped parts (plastic parts, electrical components, etc.), liquid (hydraulic
oil, brake fluid, etc.) should be recycled according to local government stipulation,do not
dispose them at will.
