Nobis A10 C PLUS QUADRA, Инструкция по установке, эксплуатации и обслуживанию

Страница: 17 / 36

Use and Maintenance Manual model “A10V - A10C PLUS QUADRA”
17
ENGLISH ENGLISH
Scroll the items to SETTINGS with the key
Access the menu by pressing key
Scroll the items to CAL. P.AMBIENT, key
On the CAL. P.AMBIENT menu item, key
The screen appears to adjust the ambient probe, as
in the figure below.
OK
OK
Edit the data highlighted using the keys
Example: Reference thermostat displays 21°C and
handheld device displays 19°C.
Set +2 for the handheld device to display the value
21°C.
Confirm the data changed using the key
To return to the STAND-BY screen, use the
key , repeating the operation multiple times.
OK
9.3 USER / AUTO MANAGEMENT
The logic, relating to this type of management, is as
follows:
USER: the user reserves the right to
set the ambient temperature he or she
wants and the power to the fireplace useful
to reach this temperature.
AUTO: the user simply sets
the ambient temperature he or she
wants for best comfort, the appliance
manages the power to the fireplace and
ventilation (if present and enabled)
autonomously.
OPERATING PROCEDURE:
MENU >> ENABLE AUTO
Access the menu by pressing key
The first item on the menu, ENABLE AUTO.
Tick using the key if you intend managing the
appliance in AUTO mode .
Do not tick if you want to work in
USER mode .
OK
OK
This setting inhibits manual management of the op-
tional fan, with the exception of
the fan setting on OFF. In this case, the appliance
autonomously only manages power to the fireplace.
Ventilation remains
disabled.
9.5 FIREPLACE POWER SETTING
The fireplace power defines the quantity of heat pro -
duced by the appliance, this implies
a different fuel consumption. Basically, it is used to
speed up the useful time to reach the
ideal temperature, set for the premises where the
product is installed.
From the STAND-BY screen, key to select the
power;
The values vary from 1 to 7;
Edit the value with the keys
Confirm the new setting with the key or wait 3
seconds for auto-confirm.
OK
9.4 AMBIENT TEMPERATURE SETTING
The ambient temperature defines the temperature
you want to obtain in the premises where the prod-
uct is installed.
From the STAND-BY screen, key to select the
value;
The values vary from 7°C to MAN (with the MAN val-
ue it is intended that, once set, the appliance NEVER
goes to power save).
Edit the value with the keys
Confirm the new setting with the key or wait 3
seconds for auto-confirm.
OK
9.6 SWITCHING ON/OFF THE PRODUCT
To switch on the product, prolonged press the key
until the following screen appears,
followed by an acoustic signal.
This screen remains on for the following machine sta-
tuses;
SWITCH ON • Initial phase of pellet loading;
WAITING FLAME • Flame development waiting
phase;
FLAME PHASE • Stabilisation phase of flame and
oxidiser inside the brazier;
1
2
1
2