Nobeltec IR2-HD2, Руководство по установке

Страница: 21 / 82

InSight Radar (IR2) (IR2-HD2 and Higher Models)
Nobeltec
13
Installer’s Guide
Hardware Installation
Installing the Antenna Unit
When you have decided the place of installation, prepare the mounting bracket or
platform as shown in Figure 3.3. If the surface of a platform or mounting base is not
even, insert appropriate fairing materials between the antenna pedestal and the
mounting surface to ensure a stable mounting platform.
Figure 3.3—Recommended mounting base or platform
Using the included drill-hole template (or you can refer to the drawings in Figure
2.4), drill holes for the five locations on the mount base and use these holes to fix the
scanner unit to the mount base with hexagonal bolts. The bolts included with your
radar equipment will suffice for mount base thickness of 9 to 14 mm (0.35 to 0.55
in.). If the mount base is thicker or thinner than this, prepare the bolts listed in the
tables 3.1 and 3.2.
Figure 3.4—Mounting diagrams
Note
: Access hole for vertical cable entry only.