10 Configuration via Web Based Management (WBM)
NivuLink Compact - Document revision 02 / 06.08.2020
page 53
9.5.2 Cold Start Reset
e!RUNTIME Runtime System
Cold start reset will reset all
e!RUNTIME
applications. All global data as well as the retain-
variables will be reset to initialisation values.
Execute Cold Start Reset:
1. Move the mode selector switch to reset position and hold it there for longer than
7 seconds.
After 7 seconds execution is indicated by the red "RUN" LED going off longer.
2. Let the mode selector switch go.
10 Configuration via Web Based Management (WBM)
Web-Based Management (WBM) serves to configure the controller. You can access the
WBM using an Internet browser.
NIVUS recommend using Google Chrome.
In the following sections you can find any relevant information for the commissioning of the
NivuLink Compact by using WBM.
10.1 Basic Instructions
Should cookies be deactivated in your browser observe the information below:
You can continue using WBM as long as you move directly within. Once you should reload
the website completely (e.g. using F5) the browser has no possibility to save the data of your
log-in session. In such a case you need to log in again.
Observe when executing a CODESYS program:
Once the controller is busy due to a CODESYS program processing within WBM may slow
down. This is why possibly time-out errors may be reported. Therefore, it makes sense to
stop the CODESYS application prior to beginning comprehensive configuration works using
WBM.
10.2 Access Rights
Access Right
Navigation Entry
Call Up
Free accessible (user =
guest)
Black letters (ac-
tive)
Select in navigation.
Read and write permis-
sion only for authorised
users
Grey letters
(inactive)
Log in with WBM and thereby (accord-
ing rights provided) activate in naviga-
tion.
Tab. 10-1 WBM: access rights
