NIVELCO EasyTREK SP-500 Pro, Инструкция по установке и программированию

Страница: 27 / 44

spa580en22p06 ♦ 27 / 44
5.3.7 V
OLUME MEASUREMENT
P40: d c b a Volume calculation options FACTORY DEFAULT:
0000
dcba Calculation method (tank shape)
Parameters to be
programmed
1000 Output Conversion Table (OCT) table,
see chapter
5.3.9
00b0 Standing cylindrical tank shape (value of “b” as below) P40b , P41
0001 Standing cylindrical tank with conical bottom P41 , P43 , P44
0002 Standing rectangular tank (with chute) (value of “b” as below) P41 , P42 , P43 , P44 , P45
00b3 Horizontal cylindrical tank shape P40b , P41 , P42
0004 Spherical tank P41
EView2 setting: “Device Settings” → “Tank/Silo parameters” → “Tank/Silo shape.”
P41-45: - - - - Tank dimensions FACTORY DEFAULT:
0
Standing cylindrical tank
with hemispherical bottom P40a = P40b = 0…3
Standing cylindrical tank
with conical bottom P40a = 1, P40b = 0
Standing rectangular tank
with or without chute P40a = 2, P40b = 1
flat bottom P43 , P44 and P45 = 0
Horizontal cylindrical tank P40a = 3, P40b = 0…3 Spherical tank P40a = 4, P40b = 0
EView2 setting: “Device Settings” → “Tank/Silo parameters” → “Tank / Silo dimensions.”