NIVELCO EasyTREK SP-500 Pro, Инструкция по установке и программированию

Страница: 16 / 44

16 / 44 ♦ spa580en22p06
A: Shortest measurable distance
H: Maximum measurable distance, also the
distance to zero level
B: Volume associated with the highest
measurable level
C: Total volume of the tank
Transmitted value
VOL
f
P40…P45
(H-DIST)
Parameters to set P00
P01a = 3
P02b
P04 = H
P05 ≥ X
m
P40…P45
P02: - c b a Calculation units FACTORY DEFAULT: 000
a Temperature The unit of temperature can be selected at this point.
EView2 setting: “Device Settings” → “Measurement configuration” → “Temperature.”
0 °C
1 °F
b
Volume * Weight (set also P32) Volume flow
Metric US Metric US Metric US
0 m
3
ft
3
tons lb (pound) m
3
/time ft
3
/time
1 liter gallon (BR) tons tons (BR) liter/time gallon/time
2 liter gallon (US) tons tons (US) liter/time gallon/time
The unit of measure of the transmitted quantity for an instrument set to measure volume, mass or flow. The contents of the table is interpreted
in accordance with P00c , P01a and P02c . The instrument converts the measured level into volume, weight, or flow by calculating using a level-
dependent (non-linear) function or output correction table (OCT) according to P40 . This parameter also gives the unit of measure of the “Output”
column of the OCT table.
EView2 setting: “Device Settings” → “Measurement configuration” → “Engineering units.”