34
EN
11 Setting Functions
By setting various functions of electric driver, work quality can be improved. For the setting value of each function, see
“Function settings list” (p. 19).
Function settings are applied to all channels. Functions cannot be assigned for each channel.
1
In screw fastening mode, press and hold the [MEMORY] button and [SELECT] button
The buzzer sounds, the main LED lights in green and the workpiece LED goes off.
Press and hold
at the same
time
Flashes
Lights off
Lights in purple
Function No.
Set value
The mode enters function setting mode.
2
Press the [SELECT] button to select the function No.
3
Use the [UP] or [DOWN] button to select a set value
4
Press the [SELECT] button to select the next function
5
Press and hold the [MEMORY] button to save the setting
The main LED flashes in blue and the mode returns to screw fastening mode.
Initializing the function setting
A set value can be initialized by pressing and holding the [UP] button and [DOWN] button at the same time in function
setting mode. Once initialization is done, you cannot restore the settings.
Press and hold at the same time
TV07521-1_DLV30S12P-AYK_en.indb 34
2017/02/10 15:56:35
