Nitto Kohki delvo DLV30S AY Series Скачать руководство пользователя страница 3

Страница: 3 / 76

Product Specific Safety Rules

WARNING

Use the dedicated power supply at all times.

This tool requires a dedicated power supply provided by our company. Using other power supplies could result in

a fire or accident.

Do not look directly into the LED (light-emitting part) from close up.

Powerful LED light could damage your eyes. Also, do not point the LED (light-emitting part) at people's or

animals' eyes.

CAUTION

Do not apply shock (such as dropping) or excessive load to the motion setting unit (LED or button).

Doing so could cause a failure.

This tool is not an impact type electric screwdriver. Do not tighten twice (extra tightening). Also, it cannot be

used for screw tightening of such things as wood or drywall.

Depending on fastening conditions, screws may become loose.

Improper impacts could decrease product life or cause product failure.

Do not use the tool for anything other than screw tightening.

It should not be used for tasks such as drilling or threading (such as a tapper).

The relationship between the speed and the speed level is standard.

About Unit Notation

This instruction manual is written using both SI units and the imperial measurement method (yards, pounds).

Numeric values outside the ( ) are the value in SI units, while those inside the ( ) are the imperial measurement

value.

Notation Example: Length 25.4 (1") Weight:

0.45 (1) Torque:

1.13 (10)

lbs

Lb·in

TV07521-1_DLV30S12P-AYK_en.indb 1

2017/02/10 15:56:29

Содержание delvo DLV30S AY Series













































































Результаты поиска

Содержание delvo DLV30S AY Series

Отзывы:

Похожие инструкции для delvo DLV30S AY Series

Бренды по названию

Популярные бренды

Nitto Kohki delvo DLV30S AY Series, Инструкция по эксплуатации

Результаты поиска

Содержание delvo DLV30S AY Series

Отзывы:

Похожие инструкции для delvo DLV30S AY Series

Бренды по названию

Популярные бренды