eNCard-i User guide
73
NITGEN Co., Ltd. /
(Bangi-dong) 6 Wiryeseong-daero, Songpa-gu, Seoul, 138-827, Korea
Tel: 02-6488-3052, Fax: 02-6488-3098, E-Mail:[email protected]
3.10. SD USB (USB port is service port.)
SD (Storage Device) USB on-The-Go function is supported in the card reader terminal. You will
need a cable as shown below. USB storage function will allow you to import and export files
to and from the terminal.
User data, log data, pictures, images and firmware upgrading can be performed. It is
recommended that your USB has at least 1GB available for storage. You cannot select any
options in the USB-SD menu until a USB device is connected. The USB device can be
connected at anytime before or after entering this area. Once you connect your device you
must wait up to 10 seconds before the terminal will recognize it and a ‘detected’ message will
appear. The USB should be formatted as FAT/FAT32 file system type. NTFS is not supported.
1)
Prepare your USB device by formatting for FAT/FAT32 File system type
2)
On the USB device from your PC, create a directory in the root called ‘CR’
3)
On the USB device from your PC, create a directory in the root called ‘CR/languages’
4)
On the USB device from your PC, create a directory in the root called ‘CR/backgrounds’
5)
On the USB device from your PC, create a directory in the root called ‘CR/firmware’
6)
Insert the USB into the cable, and then insert the cable into the card reader.
7)
On the card reader menu Touchscreen select the USB icon.
8)
After completing import or export you must select OK button to correctly save the information
to the USB device.
9)
Remove USB device.
Note: After selecting OK you must remove, then insert the USB device in the card
reader before entering the USB menu again. This will ensure correct saving and
shutdown of the USB device.
