eNCard-i User guide
45
NITGEN Co., Ltd. /
(Bangi-dong) 6 Wiryeseong-daero, Songpa-gu, Seoul, 138-827, Korea
Tel: 02-6488-3052, Fax: 02-6488-3098, E-Mail:[email protected]
i.e , if Period mode = Leaving mode, Function key -> Enter mode is pressed, after 15
seconds the mode will change back to Leaving mode.
The time periods should not be overlapped, but if they are overlapped, the application
order is Attend->Leave->Out->In->Access. If the time is set between 23:00~01:00, it
means from 23:00 to the 01:00 the following day.
▶
Blocking time: This function prevents the same user to authorize again in the set time.
There is no restriction if it is set 0, but if it is set larger than 0, the user can authorize
again when the set time (sec) is passed from the previous authorization. It can be set
up to 86,400 seconds (24 hours).
3.5.2. Function keys
The following window appears if you select the [Application] -> [Function key] in the
main menu.
▶
Basic setting : Same with the window at the left side
▶
F1-F4 Key
Access button used to change the authorization mode
such as attendance and leaving, and if you select the
F1-F4 Key, the authorization mode is changed to the
mode. Only the checked buttons will appear on the
main window. Note: Only maximum 2 function keys
will appear on the main window, any additional
function keys will appear in the extended key window.
▶
In some cases additional function keys are needed in
addition to the four main function keys.
The
administrators will setup the terminal for this
operation. Up to 60 additional function keys are
available. The extra function keys will appear in the
extended view window from the main window.
4 – 60 extended keys can be selected.
Select the [OK] button to save the value or select [BACK] button to cancel and return.
