Using the NiTek Plus
NiTek Plus Dive Computer User Manual
25
(1) Surface interval time:
This is the amount of time between
dives you plan on waiting. The no-decompression limits are
based on this time period. The longer the surface interval time,
the longer the no-decompression limit time.
(2) Depth:
This is the depth used to plan the dive.
(3) PO2:
This is the PO2 for mix1 at the depth displayed.
To enter plan simulation mode:
1. Press Mode until the arrow points to PLAN at the bottom of
the screen.
2. Press Lock.
3. Press Select to increase the surface interval time by 30
minutes.
4. Press Set to increase the depth by 10 feet (3 meters).
5. Press Lock.
