Using the NiTek Plus
12
NiTek Plus Dive Computer User Manual
Time display mode
Time display mode is the NiTek Plus’s default mode. The
computer returns to this mode automatically upon surfacing from
a dive and from other modes when a period of time has passed
without any buttons being pressed.
1
2
3
4
(1) Day of week:
This is the day of the week (Sunday through
Saturday) expressed as a two-letter abbreviation.
(2) Time of day:
This is the time of day expressed in hours,
minutes, and seconds. Time can be displayed in 24-hour
(military) format (as shown) or 12-hour format. When in 12-hour
format, an A or P appears on the screen, indicating that it is AM
or PM.
(3) Dual time:
This is an alternate time that can be set for a
different time zone (see “Setting an alternate time”). Alternate
time only appears if it has been set for a time different than the
primary time. A “D.T.” (dual time) is displayed next to the
alternate time when an alternate time is set.
(4) Date:
This is the month and day. The first digit is the month
and the second digit is the day. For example, 6-26 represents the
twenty-sixth day of June.
Note:
The NiTek Plus may display additional information
concerning exposure to nitrogen and oxygen, desaturation time,
surface interval time, and altitude. These items are covered in
“Surface mode” and “Altitude operation.”
