Using the NiTek Plus
NiTek Plus Dive Computer User Manual
15
Dive option set and display mode
Dive option set and display mode is where all “dive” option
settings are displayed and set up.
Using computer mode
Computer mode is when the NiTek Plus is operating in the
normal computer mode. “Dive” is displayed on the screen and all
computer mode functions operate normally. The dive option set
and display mode is used to review and change option settings
that pertain to an upcoming dive. The operating depth limit when
in dive operation is 328 feet (100 meters).
FT
1
9
4
5
6
2
3
7
8
Dive option display and set fields
•
(1) Dive operation
•
(2) Mix1 FO2 gas percentage
•
(3) Mix2 FO2 gas percentage
•
(4) Dive safety factor
•
(5) Dive log profile sampling rate
•
(6) Salt or fresh water use
There are three “display only” option fields that change based on
how the above settings are set.
•
(7) Metric or Imperial units of measurement
•
(8) Nitrox indicator: “Nitrox” is displayed if mix1 is set for a
FO2 of greater than 21 percent. If mix1 is set for 21 percent
(air), nothing appears. If mix1 is in “default,” the Nitrox
