Using the NiTek Plus
22
NiTek Plus Dive Computer User Manual
In gauge mode, you can still set the profile sampling rate and salt
or fresh water use. For more information on these options, see
“Dive option set and display mode.”
To select and setup gauge operation:
1. Press Mode until the arrow points to D.S. at the bottom of
the screen.
2. Press Lock.
“Dive” flashes.
3. Press Set to select gauge operation.
“Gage” is displayed and is flashing.
4. Press Select to set for salt or fresh water use. Press Set to
toggle between “sea” and “fresh.”
5. Press Select to set the profile sampling rate. Press Set to
select 15-second or 30-second.
6. Press Lock.
