Using the NiTek Plus
24
NiTek Plus Dive Computer User Manual
exceed a limiting PO2 of 1.6 atmospheres, a series of horizontal
lines appears in place of the no-decompression limit.
To enter plan mode:
1. Press Mode until the arrow points to PLAN at the bottom of
the screen.
2. Press Select to advance the depth or press Set to decrease the
depth.
The no-decompression time limits change automatically
based on the depth.
WARNING:
Do not plan dives to depths deeper than those for
which the NiTek Plus is capable of displaying an available no-
decompression limit. Doing so could cause you to exceed the no-
decompression limits or a limiting PO2 of 1.4 atmospheres (1.6
atmospheres for deco). This may increase your risk of
decompression illness or CNS oxygen toxicity and can lead to
serious personal injury or death.
Plan simulation mode
The NiTek Plus allows you to simulate a dive plan based on
residual nitrogen, surface interval time, and depth. This gives
you information about how long you can stay at various depths
while remaining within the no-decompression limits.
Note:
You can only enter plan simulation mode if the computer
calculates that there is residual nitrogen in your system.
1
2
3
