Using the NiTek Plus
10
NiTek Plus Dive Computer User Manual
Getting started
The NiTek Plus has many modes and screens and a number of
options that can be changed depending on your dive location and
profile. The following is a checklist of general things that you
should pay attention to before, during, and after a dive.
Before a dive
•
Check that the proper time and date are set. If you traveled,
your NiTek Plus may be set to your home time zone.
•
Check that the proper mixes are set for mix1 and mix2. If
you are using gauge mode, make sure it is set to “gage.”
•
Make sure that you review the dive plan mode for maximum
depths and times for the mixes you are using
During a dive
•
Monitor the NiTek Plus throughout your dive for depth and
time
•
Monitor the N2 and O2 loading bar graphs
•
Pay attention to any alarms, such as an ascent rate warning
•
Follow the no-decompression limits or complete the required
decompression displayed and perform the necessary safety
stop
After a dive
•
Monitor surface interval time if making another dive
•
Follow the no-fly requirements
•
Review your dive using the log mode and profile mode
•
Download the dive log to your PC if you have the optional
PC interface
