Push the lever of the locking ring (in
the direction of the arrow) of Di600
to loosen it as shown in the picture.
Slide the mounting foot of Di600 into
the hotshoe of the camera while
holding down the lock ring.
Release the lock ring of Di600 when
the mounting foot is fully slide into
the hotshoe of the camera.
Lock pin comes out to hook the foot
at the hotshoe for sure contact.
Mounting Di600 on the camera
*For Sony type digital SLR cameras
Removing Di600 from the camera
Push down the lock ring and slide the mounting foot of Di600 off
the hotshoe of the camera. Make sure to slide off the mounting
foot and completely clear the lock pin off the hooking slot on the
hotshoe.
Before mounting or removing Di600 into or from the camera,
make sure to turn off the power switch of both Di600 and the
camera.
NOTE
6
