When the flash unit is turned on, it is automatically set for TTL
(E-TTL II / E-TTL for Canon, or i-TTL for Nikon, or ADI / P-TTL for
Sony) automatic flash mode. In this mode, the mode select
indicator does not light.
You can select the power by pressing the -- / + button, from the
left to right, 1/32 – 1/16 – 1/8 – 1/4 – 1/2 – 1/1(Full) power.
Select your desired F--stop and / or shutter speed. Point the
subject and press the shutter.
Set the camera shooting mode to either [
AV
](Canon),
[
A
](Nikon), [
A
](Sony), or [
M
].
The color of mode select indicator turns to Red as shown in the
picture.
Press the mode select button.
In some occasions, or for special expression, you may need your
own flash exposure instead of the automatic controlled exposure.
You can set Di600 for non-automatic flash mode, and select the
desired flash power from 6 different levels
Manual Exposure Flash
Red
15
Synchro Terminal
Di600 is equipped with a Synchro terminal (X terminal) to connect an
off-camera cable. This allows photography with flash units separate
from the camera. This feature can be applied in Manual mode only.
On/Off
