Shooting Di600 automatically
Canon cameras
Nikon cameras
(Program), (Full Auto), (Aperture priority),
(Shutter priority) or (Manual);
(Program), (Full Auto), (Aperture priority),
(Shutter priority) or (Manual);
Set Di600 to the camera’s hotshoe and turn on the power switch.
Di600 is automatically set for the camera’s TTL mode when ready
lamp lights up.
Press the shutter button of your camera halfway to focus the subject.
Take the picture. Di600 is fired and the result is immediately shown on
the camera’s LCD display.
When you change the focal length, the power zoom flash head of
Di600 responds without delay and immediately sets its position to
match the lens focal length you selected.
The flash illumination coverage of Di600 responds to the lens focal
length of 24mm to 105mm (35mm film camera standard).
In all camera's shooting modes listed above, Di600 will fully work in
TTL (ETTL, ETTL-II for Canon, i-TTL for Nikon and ADI, P-TTL for
Sony ) automatic-flash system.
Shutter speed, aperture and flash mark ( ) are indicated in camera’s
view finder.
Sony cameras
(Program), (Full Auto), (Aperture priority),
(Shutter priority) or (Manual);
8
