TTL exposure level is accurately calibrated for standard balance in
accordance with Nissin’s standard. If any adjustment is however
required, or if you like to set your preferable level, it can be adjusted for
about ±0.75 (3/4) Ev. This adjustment can only be set when the flash is
off. Insert 4 AA batteries in the battery compartment.
Press the pilot button and On/Off switch
both together and hold for 3 sec. The
mode select lamp turns light blue color
showing the unit is ready for TTL
exposure level adjustment.
TTL Exposure level custom setting
Light Blue
Press together
Press the power level select button
or - to adjust it to the required
exposure level. Each LED shows 0.25
(1/4) Ev. increments and it can be
adjusted up to +0.75 (3/4)Ev. (over
exposure efficiency), or down to -0.75
(3/4)Ev. (under exposure efficiency).
Press the On/Off switch for 3 sec. to
turn the unit off. The adjusted level is memorized and kept as
customized default TTL exposure level. This setting is
permanently kept until you alter the setting to the other required
level.
Start to use flash unit from “Turn on the flash unit” at “BASIC
OPERATION” explained as above.
19
On/Off
On/Off
