Instruction Manual MA-3000+RD-5+SC-5
NIC-TD-0000015-05
43
10) Adjust the protrusions of the bubbler and tubes, and fix the dispensing cap,
tube packing and dispensing block using three resin screws.
*
Be careful for the protrusion of reaction tube, it has the risk to inhale
samples.
11) Pass a resin screw with a resin washer through the screen for the
photo-sensor and arm block in that order and through a resin spacer and a
spring on the cap side, and fix them tentatively.
12) Attach the components to the other two places in the same way, and fix them.
(Reaction tube)
(Reagent tube)
±1
Resin screws
(3 places)
Tube packing
Dispensing cap
Dispensing block
Resin screw and
resin washer
Screen for
photo-sensor
Resin spacer
and spring
