Instruction Manual MA-3000+RD-5+SC-5
NIC-TD-0000015-05
31
(2)
Setting the sample
Put standard solution into test tube, and set to
the holder. Click “MEAS” dialog and
check marks are put in.
(3)
Starting the measurement
Click icon or Menu "Run(R)" - "Start". And then measurement starts.
Set the file name to save the measurement data. When you click the
“SAVE”, the
measurement will start.
(4)
Termination of measurement
When all measurements of the sample which are checked the in the table are
completed, the following message is displayed.
<Interruption of the measurement>
When you want to interrupt measurement, click icon or Menu "Run(R)" - "Stop".
If it is clicked, it finishes after the present measurement is completed.
If you click Icon after clicking stop, it returns to an READY status.
