114
CYLINDER
7d
Fill with grease.
X-ring
Apply grease all around the O-ring.
221W109E
Reassembling of the cylinder tube ASS'Y, the piston rod
ASS'Y and the cylinder head
3.
1. Fixing of the cylinder tube ASS'Y
Fix the cylinder tube ASS'Y horizontally.
2. Inserting the spacer (Fitting of the wear ring)
Insert the spacer onto the piston rod ASS'Y. Insert the
spacer until it touches the piston.
If the wear ring was fitted on the spacer originally, fit
the new wear ring in the groove on the spacer.
3. Inserting of the piston rod ASS'Y
Insert the piston rod ASS'Y into the cylinder tube
ASS'Y.
Push the piston rod ASS'Y all the way to the end of
the cylinder tube ASS'Y.
4. Lubrication
Fill the grease in the groove behind of the X-ring in the
cylinder head.
Spacer
Wear ring
221W111E
l
Make sure that the plug is removed before
inserting the rod into the tube of the cylinder.
l
Keep the rod horizontally when inserting.
l
Pay attention not to hit the piston or the rod
to the thread of the cylinder tube. Otherwise,
p a r t s o n t h e p i s t o n o r t h e r o d m a y b e
damaged.
CAUTION
https://www.forkliftpdfmanuals.com/
Содержание FB10P
Страница 2: ...https www forkliftpdfmanuals com...
