nip POLLUX PX01M90MGE Скачать руководство пользователя | Manualshive

Страница: 2 / 56

background image

NIP

Pollux GigE Series – 01M / 05M Camera

Page

2

of

56 Manual 1.0

Notice

The material contained in this manual consists of information that is proprietary
to NIP Co., Ltd. and may only be used by the purchasers of the product and NIP

Co., Ltd. authorized distributors or resellers. NIP Co., Ltd. makes no warranty for
the use of its product and assumes no responsibility for any errors that may

appear or for damages resulting from the use of the information contained in this
manual. NIP Co., Ltd. reserves the right to make changes to this manual at any

time without notice.

Warranty

The Pollux GigE product family is warranted for one (1) year from the date of
purchase unless otherwise agreed in writing. If the product proves to be defective

during this warranty period, NIP Co., Ltd. will, at its discretion, either repair or
but the product has been discontinued, a product with similar or better

performance capabilities and features will be provided. This warranty shall not
apply to any damage, defect or failure caused by improper use or inadequate

maintenance of the product.

CE Compliance

This EC-Declaration of Conformity is following the provision of EMC Directive
2014/30/EU and RoHS Directive 2011/65/EU. It is confirmed that a sample of the

product has been tested and found in conformity with below standard(s) :

• EMI - EN 55022:2010/AC:2011

•   EMS - EN 55024:2010/A1:2015
•   Class A
•   RoHS - EN 50581:2012, IEC 62321-3-1:2013

All NIP Co., Ltd. products bearing the CE mark have been declared to be in
conformance with the applicable EEC Council Directives. Note that the use of

interconnect cables that are not properly grounded and shielded may affect CE
compliance

«
1
2
3
4
...
»

Содержание POLLUX PX01M90MGE

























































Отзывы:

Нет отзывов

Похожие инструкции для POLLUX PX01M90MGE

Бренд: Camatics Страницы: 11

Бренд: Xblitz Страницы: 12

PalmCam PV-SD5000

Бренд: Panasonic Страницы: 76

Бренд: Panasonic Страницы: 24

Бренд: Panasonic Страницы: 178

Бренд: Panasonic Страницы: 197

Бренд: Panasonic Страницы: 28

Бренд: Panasonic Страницы: 34

Бренд: Panasonic Страницы: 2

Бренд: Panasonic Страницы: 2

Бренд: Panasonic Страницы: 82

Бренд: Panasonic Страницы: 136

Бренд: Panasonic Страницы: 2

Бренд: Panasonic Страницы: 128

Бренд: Olympus Страницы: 148

Бренд: Canon Страницы: 164

PowerShot SD1200 IS Digital ELPH

Бренд: Canon Страницы: 41

E-330 - Evolt E330 7.5MP Digital SLR Camera

Бренд: Olympus Страницы: 116

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды