NIP
Pollux GigE Series – 01M / 05M Camera
Page
33
of
56 Manual 1.0
4.8
Counter Control
The counter can divide frequencies that from external inputting trigger signal. You
can control the exposure depends on your expectations. Operation steps are as
follows:
As shown in Figure 36, click Acquisition Burst Frame Count and select Trigger
Source. Choose Counter 0.
Figure 36.
Trigger Source Configuration
As shown in Figure 37, click Counter and Timer Control and select external trigger
source which needs frequency division.
Figure 37.
Counter Frequency Division Configuration
Note
: By default, Line 0 is signal input pin. Line 2 is configurable input and output
pin. Configure Line 2 to input pin in Digital IO Control, as shown in Figure 38, in
order to do frequency division for Line 2.
