NINER ENCYCLOPEDIA
>>
SPECIFICATION & SETUP GUIDE
28
: Updated: SEPT 5, 2012
370MM
14.5IN
ON A 29ER WITH A BOTTOM BRACKET HEIGHT OF 13.2 INCHES, THE
BOTTOM BRACKET WILL BE 1.3”
lOWER
THAN THE AXLE CENTER LINE
ON A 26” BIKE WITH A BOTTOM BRACKET HEIGHT OF 13.2 INCHES,
THE BOTTOM BRACKET WILL BE 0.2”
HIGHER
THAN THE AXLE
CENTER LINE
29
26
335MM
13.2IN
333MM
13.0IN
This drawing shows the relationship between the bottom bracket and the center axle line.
The red line represents equal 13.2” bottom bracket height on both 26” and 29”
MTBs. The blue line represents the center line of the axle on each bike.
Note: all suspension designs up until the development of CVA™ were designed around 26”
wheel and the 26” wheel bottom bracket to axle center line relationship.
ABOUT CVA™ SUSPENSION - (U.S. PATENT NO. 7,934,739)
