Nilfisk-Advance 56413006, Руководство по обслуживанию

Страница: 77 / 84

FORM NO. 56043122 - BR 1100S, 1300S - 75
ELECTRICAL SYSTEM - 8
MAIN CONTROL PROGRAMMING OPTIONS (CONTINUED)
Vacuum Motor Con fi guration Option:
FACTORY DEFAULT: SINGLE (1)
All rider scrubber models covered in this manual can be equipped with an optional dual vacuum motor. The A1 main controller must be programmed for the number
of vacuum motors installed so that the current overload protection will function properly. To select the vacuum motor con
fi guration to be used perform the following
steps:
1 Turn the main power switch to the off position.
2 Press and hold the scrub system off and vacuum switches.
3 While holding both switches turn the main power key switch to the on position, until only the vacuum and scrub-off LED’s are on.
4 Release both switches. The vacuum indictor light will start blinking.
5 The control panel display will now indicate its setting either single or dual.
6 Pressing and releasing the vacuum switch will now toggle between “single” for a single vacuum motor or “dual” for two vacuum motors.
7 To save the new setting, press the scrub-off switch and then turn the key switch to the off position.
8 The new setting will be saved and will remain in effect until it is changed again.
Recovery Tank Full Detection Enable /Disable:
FACTORY DEFAULT: ENABLE
The BR 1100S series is equipped with a feature that will automatically shut off the vacuum and scrub systems and display a recovery tank full icon on the control
panel display when the recovery tank becomes full. If problems are encountered with the vacuum shutoff feature, such as the vacuum shutting off even when the
recovery tank is not full, this feature can be turned off. To turn this feature on (enable) or off (disable) perform the following steps:
1 Turn the main power switch to the off position.
2 Press and hold the vacuum switch.
3 While holding the vacuum switch, turn the main power key switch to the on position.
4 Continue to hold the vacuum switch until the vacuum indicator turns on.
5 Release the vacuum switch. The display will now show a text message “Rec Tank Full Detect Enable or Disable”. The vacuum indictor light will blink and the
scrub off will be turned on.
6 Pressing and releasing the vacuum switch will now select between the Enable or Disable vacuum feature. Enable means that the automatic shutoff feature is
turned on; disable means that the automatic shutoff feature is turned off.
7 To save the setting, press the scrub off switch. The display will show the key switch icon asking the user to reset the machine.
8 The new setting will be saved and will remain in effect until it is changed again. Turn the key off to exit.
Solution Flow in Reverse Enable/Disable:
FACTORY DEFAULT: ENABLE
The solution fl ow is programmed to dispense solution when backing up. If it is desired to disable solution dispensing in reverse, perform the following steps:
1 Turn the main power switch to the off position.
2 Press and hold the vacuum switch and solution switch.
3 While holding both switches, turn the main power key switch to the on position.
4 Continue to hold both switches until both switch indicators turn on.
5 Release both switches. The display will now show a text message either solution in reverse enable or disable. The solution indictor light will blink and the scrub
off will be turned on.
6 Pressing and releasing the solution switch will now alternate between the enable or disable solution in reverse functions. If enable is selected, solution fl ow will
stay on when backing up (reverse). If disable is selected, solution fl ow will stop when backing up (reverse).
7 To save the setting, press the scrub-off switch. The display will show the key switch icon asking the user to reset the machine.
8 The new setting will be saved and will remain in effect until it is changed again. Turn the key off to exit.