Nilfisk-Advance 50000593, Руководство по обслуживанию, Страница: 95 / 107

Service Manual- AS1050R 38 Squeegee System 95
Squeegee Trim Adjustment
The squeegee trim adjustment ensures that the squeegee frame is level with the floor when the squeegee is in
the lowered, operating position. If the trim is out of adjustment, either the center or the edges of the squeegee
will leave streaks of water on the floor.
1. If this procedure is not performed as a follow-up of replacing the squeegee blade(s), then make the
blade examination.
2. Drive the machine to level ground, lower the squeegee to the floor.
3. Examine the contact area between the squeegee blades and the floor. The squeegee blades should be in
full contact with the floor.
–
A small bubble level (B) may be used to adjust the frame of the squeegee to be level with the floor.
4. If squeegee is tilted up, there will be a gap at the center, and the bubble in the bubble level will be toward
the rear of the machine.
–
Turn the adjustment knob (A) counterclockwise.
5. If squeegee is tilted down, there will be gaps at both sides of the squeegee, and the bubble in the bubble
level will be toward the front of the machine.
–
Turn the adjustment knob (A) clockwise.
Figure 7
A
B
Gap
Gap