Nilfisk-Advance 50000593, Руководство по обслуживанию, Страница: 28 / 107

Service Manual-AS1050R
04 Control System 28
13.
“Error 13”:
Need to replace vacuum motor carbon brush
•
Replace vacuum motor carbon brush or vacuum motor.
•
Reset vacuum motor runtime.
1. Refer to
steps in “Access to Panel Parameter Setting”(Page 21).
2.
Press “scrub p” button to select NO.13 parameter. (Figure 1).
3. P
ress the 4 buttons “s”, “solution-”, “scrub p” and “scrub pressure-” simultaneously, the
present runtime will be reset in 10 seconds to “0000.Hr” (Figure 2).
14.
“Error 14”:
Controller EEPROM Error or parameter setting error
•
Replace Main Controller (EB2).
•
Or contact after-sale technical support.
15.
“Error 15”:
Panel EEPROM Error or parameter setting error
•
Load the parameters of the panel
1. Refer to
steps in “Access to Panel Parameter Setting”(Page 21).
2. LCD will show the
first parameter. The default value is 0. Modify the value to 1 by pressing “s” button
(Figure 1).
3. Confirm the
modification by pressing “brush release” button. LCD will show “Update OK”. (Figure 2)
Figure 1
Figure 2
Figure 1
Figure 2
Press the button
to select NO.13
Press the 4 buttons
simultaneously
Press the button
Press the button