Niles A4.6Ci Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 107

background image

The R-4 Remote

- The R-4 Remote provides system control via an ergonomic hand-held IR remote control.

Zones that have been installed with Niles IR Sensors can take advantage of the R-4 Remote, providing system
control from anywhere in the room.

System-Wide Operation

The A4.6Ci MultiZone Preamplifier incorporates system-wide control to activate all zones to a particular source
component. An ALL OFF command is also included for complete system shutdown from any zone in the system.

Paging Input for Telephone Systems

A paging input is provided for telephone systems equipped with a paging output. Audio sensing is utilized to
detect the paging signal. Source components currently playing in the various zones are interrupted, enabling
the paging signal to play through. If a zone is off during a page, it turns on, enabling the paging signal to play
through. Front-panel switches are provided to disable this paging feature in any zones where it is not required.

12V Control Output

A control-output connector provides a constant 12V DC trigger signal the moment any zone is activated. This
signal can be interfaced to voltage-triggered AC power strips (i.e., Niles AC-3) for the automation of source
components that can only be activated via switched AC outlets.

Expandable for Larger Multi Zone Systems

Up to four A4.6Ci’s can be combined in a single system, providing 24 zones. Source component audio signals are
shared between preamplifiers, utilizing the buffered cascade audio outputs provided for each source component.

Multiple Rooms in a Single Zone

A single zone of an A4.6Ci can be expanded to accommodate as many as six individual rooms (master-bedroom
suites, outdoor areas, etc.). A Niles Ci Silencer Muting Volume Control (White - FG00773, Almond - FG00774,
Bone – FG00776) located in each room/area in the zone along with a Master Keypad Module (Solo or Select) pro-
vides individual ON/OFF and volume adjustment. A Niles Ci Expander (FG00853) connects all keypads to a single
zone of the A4.6Ci preamplifier. As many as 36 rooms can be connected to a single A4.6Ci preamplifier using six
Ci expanders and 36 Ci silencer volume controls.

Program Memory Protection

The A4.6Ci MultiZone Preamplifier utilizes non-volatile memory for storage of its programming. This safe-
guards against accidental loss of the programming for the entire life of the product.

8

FEATURES AND BENEFITS

«
...
6
7
8
9
10
...
»

Содержание A4.6Ci












































































































Отзывы:

Нет отзывов

Похожие инструкции для A4.6Ci

Бренд: NAD Страницы: 36

Бренд: Caledonian Audio Страницы: 55

Бренд: Jolida Страницы: 17

Бренд: ZENEC Страницы: 30

Бренд: Parallel Audio Страницы: 12

Бренд: Signal Vehicle Products Страницы: 20

Бренд: Marantz Страницы: 17

The Prelude PC-200

Бренд: Harman Kardon Страницы: 6

Бренд: JL Audio Страницы: 10

Бренд: NAIM Страницы: 12

Бренд: T+A Страницы: 70

Бренд: Cloud Страницы: 56

Troubadour T80IISM

Бренд: Ibanez Страницы: 28

Бренд: UFi Страницы: 4

Tube Ultragain T1953

Бренд: Behringer Страницы: 23

Бренд: Toa Страницы: 16

XTR Power Amplifier XTR15001

Бренд: Orion Страницы: 102

Бренд: Amperes Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды