Niles A4.6Ci Скачать руководство пользователя страница 89

Страница: 89 / 107

PROGRAM-EDITING STEPS

Step 5

Repeat steps 3 and 4 until all inputs have been edited.

Step 6

Press NEXT to edit Function Key IR. The FUNCTION KEY IR/(FUNCT. KEY SEQ.) LED turns on RED,

and the PAGE LED blinks RED.
or

Step 7

Press PROGRAM again to save and exit programming.

EDIT FUNCTION KEY IR PROGRAMMING

Steps to edit the individual IR commands stored to the various Function Keys.

Step 1

Press and hold the PROGRAM button.

Step 2

Press the NEXT button twice. The FUNCTION KEY IR/(FUNCT. KEY SEQ.) LED turns on RED, and

the PAGE LED blinks RED.

Step 3

Press the appropriate Master Key to choose a page to edit.

or
To edit a Function Key within the Default Page, tap the OFF Key. Master Keys 1 and 3 illuminate.
or
To edit a Function Key within the Library Page, press and hold the OFF key. Master Keys 1, 3, and 4 illu-
minate, simulating an "L."

The PAGE LED turns off, and the KEY LED blinks RED.

Step 4

Press the Function Key you are editing.

The KEY LED turns off, and the ENTER IR LED turns on RED.

Step 5

Press the appropriate command on the original, factory remote.

The ENTER IR LED turns OFF, and the KEY LED blinks RED.

Step 6

To test the command(s), press the TEST button. If it does not operate the component as expected,

teach and test the command again until it does.

Note:

Repositioning the remote control when teaching the command can assist in capturing commands

accurately.

Step 7

To edit other Function Keys for the same Master Key Page. Repeat steps 4, 5, and 6 until all IR com-

mands have been edited.

Step 8

Press the PROGRAM button to select a different Master Key Page.

The KEY LED turns off, and the Page LED blinks RED.

Step 9

Repeat steps 3 through 7 until all the necessary IR commands have been edited.

Step 10

Press Next to Edit Master Key Sequences. The (POWER)/MASTER KEY SEQ LED turns on GREEN,

the TRIGGER LED turns on RED, and the PAGE LED blinks RED
or

Step 11

Press PROGRAM again to save and exit programming.

Содержание A4.6Ci












































































































Результаты поиска

Содержание A4.6Ci

Отзывы:

Похожие инструкции для A4.6Ci

Бренды по названию

Популярные бренды

Niles A4.6Ci, Руководство по установке и эксплуатации

Результаты поиска

Содержание A4.6Ci

Отзывы:

Похожие инструкции для A4.6Ci

Бренды по названию

Популярные бренды