86
PROGRAMMING STEPS
After you choose a delay, all Master Keys turn off.
The
KEY
LED turns OFF, and the
PAGE
LED blinks RED.
Step 7
- To add another delay, press the
DELAY
button again, and repeat the previous step. (For example, you can have
two consecutive one-second delays.)
Step 8
- Repeat steps 3 through 7 until you have programmed all the steps in the Function-Key Sequence.
Step 9
- Press the
PROGRAM
button to program a sequence for a different Function Key within the same Master Key Page.
The
TRIGGER
LED turns on RED, the
PAGE
LED turns off, and the
KEY
LED blinks RED.
Step 6
- Choose the Master Key for the desired delay time. Refer to the table below:
DELAY TABLE
KEY
Master Key 1
DELAY TIME
.5 seconds
Master Key 2 1 seconds
Master Key 3 4 seconds
Master Key 4 8 seconds
For example, if you press Master Key 2,
a one-second delay is added to the sequence.
Содержание A4.6Ci
Страница 104: ...104 NOTES ...
Страница 105: ...105 NOTES ...
