36
Transfer, Control, and HTTP
Camera C
o
ntr
o
l
A
Ethernet Networks
Do not disconnect the Ethernet cable while the camera is on.
D
Wireless Networks
Operations may take longer on wireless networks. If the signal is
disrupted while pictures are being transferred to Camera Control Pro 2,
the LED on the WT-7 will flash orange; turn the camera off and then on
again. Transfer will resume when the connection is re-established. Note
that transfer can not be resumed if you turn the camera off again before
transfer is complete.
A
Network Status
The status of the link between the host and the WT-7 is shown by the
status LEDs and by the display in the top level of the network menu.
The Status LEDs
Status
POWER
LINK
ERROR
WT-7 off
I
(off )
I
(off )
I
(off )
USB cable not connected
K
(on)
I
(off )
I
(off )
Connecting to host
K
(on)
K
(on)
I
(off )
Waiting to send or sending data
K
(on)
H
(flashes)
I
(off )
Connection error
K
(on)
I
(off )
H
(flashes)
WT-7 hardware or battery malfunction
H
(flashes)
H
(flashes)
H
(flashes)
The
POWER
LED lights when the WT-7 is on.
Signal quality is shown by the
LINK
LED: the
faster the LED flashes, the better the signal and
the faster data can be transmitted. The
ERROR
LED flashes to show that an error has occurred.
