Nikon JAA79551, Руководство по ремонту

Страница: 43 / 115

INC
JAA79551-R.3690.A
- Ａ 6・AF-S VR 70-300/4.5-5.6G -
・
Mount the focus ring unit on the SWM unit, by aligning the three protrusions of the focus ring unit with the
three grooves of the SWM unit.
Adhesive: Screw lock
#121×3
①
Turn the focus tube unit, which is assembled in the front fixed-tube, all the way to the end in the direction of
the arrow. (Then, the key groove is positioned as shown in "Fig.1".) (Fig.1) "Fig.1".) (Fig.1) Fig.1".) (Fig.1) ".) (Fig.1) .) (Fig.1)
②
Rotate the focus ring unit of the SWM-assembled unit until "∞" infinity-end position.
③
After assembling the SWM-assembled unit into the front fixed-tube, rotate the focus ring unit and check that
the distance scale can move therewith. (Fig.2)
④
Tighten three screws (#121).
∞
Index
Protrusion
Groove
Grease: MZ-800S
Apply to the sliding surface with the lens body.
Caution:
When the SWM-assembled unit is mounted, do
NOT let the MR head touch the front fixed tube.
Grease: OS-30MF
Groove
Groove
Focus ring unit
Focus ring unit
SWM unit
Mounting of SWM-assembled unit
Front fixed-tube
Focus ring unit
Apply to the overall surface of the flock tape.
SWM-assembled unit
Fig. 2
Fig.
Focus tube unit
Key groove