Nikon Eclipse Ti-E, Инструкция по эксплуатации

Страница: 82 / 133

Chapter 3 Operation
3.13 Rectangular Mechanical Stage Operation
80
3.13 Rectangular Mechanical Stage Operation
Figure 3-42 Rectangular Mechanical Stage
The knob on the rectangular mechanical stage uses
a universal joint, and can be operated freely at any
angle.
The stage is provided with screw-taps on both the
top and bottom surfaces for attaching devices such
as manipulators.
The rectangular mechanical stage is typically
attached with the knob positioned in the far right.
It is also possible to rotate the stage 180 degrees
and attach it with the knob in the near left.
25 mm bore
(with oiling notch)
40 mm bore
Figure 3-43 Concentric rings
Two concentric rings of different sizes are provided
with the microscope (ø25 mm and ø40 mm). Use
whichever is appropriate depending on the size of
the specimen.
When using the 40 mm ring, the objective may
collide with the bottom surface of the stage if the
nosepiece is rotated with the stage moved out of the
observation area. In such a case, first lower the
nosepiece to the limit, and then switch the objective.
Caution
The stage rack will protrude when the stage is operated. When operating the focus knobs or
the nosepiece, take caution not to strike your hands against the rack. Contact with the edges
of the rack may result in injury.
Figure 3-44 Rectangular Mechanical Stage Rack
Knob
Rack remains protruded.