Nikon Eclipse Ti-E, Инструкция по эксплуатации

Страница: 39 / 133

Chapter 2 Microscopy
2.2 Bright-Field (BF) Microscopy
37
11
Change the specimen.
B
Coarse
Fine
ExFine
Epi Shutter
FL Block
Refocus
Escap
e
PFS OFFSE T
OUT
DICHR
OIC MIR ROR
IN
L80
EYE
MEMORY
DISPLAY
ON
Z-RESET
1X 1.5X
BRIGHTNESS
R100
L100
FOCUS
PFS
Use the following functions as necessary.
•
Inclining of dia pillar illuminator
When using the 100W dia pillar illuminator, the
entire dia pillar illuminator can be inclined
backward by loosening the fixing knob on its
back side, so as to secure more working space.
• Escape switch, Refocus switch
If there is a need to lower the objective, the
objective can be retracted temporarily by
pressing the Escape switch on the right
operation panel.
To return the objective to approximately the
same height, press the Refocus switch without
rotating the focus knobs.
• Condenser refocusing clamp
If there is a need to move the condenser up and
down, tighten the condenser refocusing clamp
before moving the condenser. This will make it
easier to restore the condenser to the original
position.
12
End the observation.
Coarse
Fine
ExFine
Obj. ON
OFF
6V30W
MAX.
12V10
L80
EYE
DISPLAY
MEMORY
PFS
ON
RECALL
Z-RESET
BRIGHTNESS
R100
L100
FOCUS
1. Turn off the dia illumination by pressing the
dia illumination lamp ON/OFF switch on the
left side of the microscope.
2. Turn off the microscope by pressing the
“OFF” side of the POWER switch on the back
of the microscope.
3. Turn off the power supply by pressing the
“O” side of the POWER switch on the back of
the power supply.
If placing a cover on the microscope, wait until
the lamp has cooled sufficiently.
12-3
12-1
12-2
Condenser refocusing
clamp
Escape switch,
Refocus switch
Inclining of
dia pillar
illuminator