3
Operation of Each Part
29
IC Inspection Microscope ECLIPSE L200ND / L200N Instructions
Figure-36 Attaching the diascopic lamphouse (for simultaneous illumination)
Front
Rear
Figure-37 TI-PS 100W Power Supply
(For details, see the instruction manual supplied with the power supply.)
TI-PS 100W
Power Supply
Lamp cable
Power cord
POWER switch
Flip the power switch to the “ I ” side to turn
on the power supply. DC power is output
from the 12VDC outlet on the back. Flip the
power switch to the “
c
” side to turn off the
power.
Rating label
The equipment is designed for AC power of 100
to 240V AC and 50/60 Hz. Before connecting
the power cord, check that the power supply to
be used conforms to the voltage and frequency
described above.
Brightness control knob
This knob adjusts the lamp brightness.
12VDC outlet
Connect the lamp cable from the
compatible lamphouse to this connector.
AC inlet
The AC power supply is connected here. Be sure
to use the specified power cord when connecting.
EXTERNAL connector
Connect a desired external control
device to this connector. Cannot be
used for the connection with the
L200ND microscope.
EXTERNAL ON/OFF switch
Set this switch to OFF.
POWER indicator
Diascopic
lamphouse
Содержание ECLIPSE L200ND / ECLIPSE L200N
Страница 1: ...M513E 09 3 NF 2 2 4 IC Inspection Microscope ECLIPSE L200ND L200N Instructions ...
Страница 2: ......