EN
54
10-845
10.9. Deleting all stored images
Start the programming
If not already done.
Enter master code
*94 # master code # master code #
Master code = 6-digit number (own master code or factory settings)
9
4
All stored images deleted
A positive confirmation signal sounds. LED lights up yellow during 3 sec. After,
the yellow LED flashes.
All images in the folders on the SD card have been deleted. This process may
take a few minutes.
Wrong entry,
master code unknown
If you press #, a negative confirmation tone sounds. The yel-low LED flashes
rapidly during 3 sec. and then flashes again.
10.10. Changing master code
Start the programming
If not already done.
Enter master code
* 98 # old master code #new master code # new master code #
Master code = 6 digits
For safety reasons the preset master code must be
changed when put into service.
9
8
Master code changed
A positive confirmation signal sounds. LED lights up yellow during 3 sec. After,
the yellow LED flashes.
Wrong entry,
master code unknown
If you press #, a negative confirmation tone sounds. The yellow LED flashes
rapidly during 3 sec. and then flashes again.
10.11. Setting the date
Start the programming
If not already done.
Enter date
*95 # YY # MM # DD # format #
YY = year, MM = month, DD = day (year: from 2000)
Format (FI = 0)
= 0 DD.MM.YYYY
= 1 MM.DD.YYYY
= 2 YYYY-MM-DD
9
5
Date set
A positive confirmation signal sounds. LED lights up yellow during 3 sec. After,
the yellow LED flashes.
Invalid value
If you press #, a negative confirmation tone sounds. The yellow LED flashes
rapidly during 3 sec. and then flashes again.
10.12. Setting the time
Start the programming
If not already done.
Enter the time
*96 # hh # mm # ss #
hh = hour, mm = minute, ss = second (hour: 00 to 23)
9
6
Setting the time
A positive confirmation signal sounds. LED lights up yellow during 3 sec. After,
the yellow LED flashes.
Invalid value
If you press #, a negative confirmation tone sounds. The yellow LED flashes
rapidly during 3 sec. and then flashes again.
