Niko 10-845, Информация о продукте

Страница: 53 / 72

53 EN
10-845
Log deleted, images in the folder
deleted
A positive confirmation signal sounds. LED lights up yellow during 3 sec. After,
the yellow LED flashes.
On the SD card the log and folder with images is being deleted.
Invalid value (SN 1 unknown or
entry of a SN 2) If you press #, a negative confirmation tone sounds. The yellow LED flashes
rapidly during 3 sec. and then flashes again.
10.5. Setting delay time for automatic image recording
Start the programming If not already done.
Enter value *4 # value # value = 1 to 30 s (FI = 1 s)
4
Delay time is set
A positive confirmation signal sounds. LED lights up yellow during 3 sec. After,
the yellow LED flashes.
After the set time has elapsed, images are recorded during an incoming door
call.
Invalid value
If you press #, a negative confirmation tone sounds. The yellow LED flashes
rapidly during 3 sec. and then flashes again.
10.6. Setting number of images for automatic image recording
Start the programming If not already done.
Enter a value *5 # value # value = 1 to 4 (FI = 1 s)
5
Number of images set
A positive confirmation signal sounds. LED lights up yellow during 3 sec. After,
the yellow LED flashes.
After a door call, the set number of images is stored, each time with a 1 sec
break in between.
Invalid value
If you press #, a negative confirmation tone sounds. The yellow LED flashes
rapidly during 3 sec. and then flashes again.
10.7. Setting video ExtU border
Start the programming If not already done.
Set ExtU address *6 # value # ExtU address = 0 to 63 (FI = 31)
6
ExtU address set
A positive confirmation signal sounds. LED lights up yellow during 3 sec. After,
the yellow LED flashes.
Images of external units with video ExtU border ≤ the set value are recorded.
Invalid value
If you press #, a negative confirmation tone sounds. The yellow LED flashes
rapidly during 3 sec. and then flashes again.
10.8. Setting encryption
Start the programming If not already done.
Enter a value
*7 # value # (FI = 1)
= 0 images are saved as BMP file
= 1 image is stored by means of encryption
7
Encryption set
A positive confirmation signal sounds. LED lights up yellow during 3 s. After,
the yellow LED flashes.
Invalid value
If you press #, a negative confirmation tone sounds. The yel-low LED flashes
rapidly during 3 sec. and then flashes again.