NIKKARI SSET Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 40

NIKKARI SSET Скачать руководство пользователя страница 5

5

1.1.2 Warning Labels



Cautions for Handling

(a) This edger is provided with warning labels to indicate important cautions. Understand the

meanings of the warning labels thoroughly to work in a safe environment.

(b) Do not operate the edger until you have a good understanding of the meanings of the warning

labels. If you do not understand the meanings, contact your servicing dealer.

(c) Be sure to observe the warning labels and warning messages in the instruction manual at all

times while handling the edger.

(d)  Do not remove or damage the warning labels. Also, do not clean the warning labels with solvent.
(e)  Do not paint the warning labels when repainting the edger.
(f)  If the warning labels become illegible, damaged or removed, purchase new ones from your

servicing dealer, and attach them in accordance with the “■ Warning Labels and Attached

Locations".



Warning Labels and Attached Locations

1

3

2

4

5

1

Be sure to read the instruction manual and completely understand it before use.

2

Wear personal protective equipment for eyes, ears, and head during operation.

3

Remove stones , wires or wastes materials so as not to get injured by scattering of such object.

4

Take care not to get injured by the edging attachment or scattered objects.

5

Keep people and animals out of the area within a radius of 50 ft (15 m) from the edger during

operation.

«
...
3
4
5
6
7
...
»

Содержание SSET









































Отзывы:

Нет отзывов