NIKKARI SSET, Инструкция по эксплуатации, Страница: 31 / 40

31
6. Storing
When storing the attachment with the hook of the pipe cap attached to the pipe,
etc., do not pull or swing the attachment.
Wear gloves when handling the blade during the replacement, etc.
* Otherwise, hands or fingers could be severed by the blade.
When storing the edger attachment, remove the blade and place it out of the
reach of children.
Note
● Do not discard grease into the river, the sea, or the ground. Otherwise, it could pollute the environment.
After the work or when storing, follow the procedure below.
For directions after the powerhead operation is completed or storing method, refer to the powerhead
manual.
Remove the attachment from the powerhead.
Insert the hanging hook [4] of the pipe
cap [3] into the hole of the shaft tube [2]
Insert the pipe cap [3] into the shaft
tube [2]
Put on gloves.
1
[3] [2]
[4]
2
[3] [2]
3
4