NIKKARI SSET, Инструкция по эксплуатации, Страница: 10 / 40

10
Do not replace parts with inappropriate parts.
* Failure to observe the instruction could cause the product not to perform as intended
and cause injury due to deterioration of safety.
Before performing maintenance, repair or cleaning, stop the engine and remove
the attachment from the powerhead.
* If the engine starts during the work, hands or fingers could be severed by the moving
parts or blade
,
resulting in serious injury or death.
Note
● Do not perform any maintenance or repair other than those described in the instruction manual. Other
maintenance or repairs should be performed by your servicing dealer.
● Use a specified grease (general purpose No. 2 lithium grease). Also referred to as NLGI Grade-2
Lithium Based Grease. Using the wrong grease can lead to damage or failure.
1.2.7 Precautions for Transporting
Before transporting the edger, stop the engine, and ensure the blade has
stopped.
Note
● When transporting the edger, install it to a harness or keep it balanced by holding the shaft tube.
● Before transporting the edger on the back of the truck, etc., remove the attachment from the powerhead,
and then secure it so it does not move.
1.2.8 Precautions for Storing
When storing the attachment with the hook of the pipe cap attached to the pipe,
etc., do not pull or swing the attachment.
When storing the edger attachment, remove the blade and place it out of the
reach of children.