NIKKARI SSET Скачать руководство пользователя страница 37

37

      Distributor’s Limited Warranty

American Honda Motor Co., Inc.

July 2015

    

                               NIKKARI ATTACHMENTS

This warranty is limited to the following Nikkari products when distributed by American Honda Motor Co., Inc., Power Equipment Division, 4900 Marconi 

Drive, Alpharetta, Georgia 30005

(1) Private residential: Used in maintaining owner’s primary and/or secondary residence. Any other use, including but not limited to informal “for hire” use, is considered 

commercial/rental/institutional use.

To Qualify for This Warranty:

The product must be purchased in the United States, Puerto Rico, or the U.S. Virgin Islands from American Honda or a dealer authorized by American 

Honda to sell those attachments. This warranty applies to first retail purchaser and each subsequent owner during the applicable warranty time period, 

unless noted otherwise.

What American Honda Will Repair or Replace Under Warranty:

American Honda will repair or replace, at its option, any part that is proven to be defective in material or workmanship under normal use during the 

applicable warranty time period. Warranty repairs and replacements will be made without charge for parts or labor. Anything replaced under warranty 

becomes the property of American Honda Motor Company, Inc. All parts replaced under warranty will be considered as part of the original product, and 

any warranty on those parts will expire coincident with the original product warranty. 

To Obtain Warranty Service:

You must, at your expense, take the Nikkari attachment and proof of purchase to any Honda Power Equipment dealer in the United States, Puerto Rico, or 

the U.S. Virgin Islands who is authorized to sell and/or service that product, during the dealer’s normal business hours. To locate a dealer near you, visit 

our web site at http://PowerEquipment.Honda.com and click on Find a Dealer.

If you are unable to obtain warranty service or are dissatisfied with the warranty service you receive, contact the owner of the dealership involved; 

normally this will resolve the problem. However, if you should require further assistance, write or call the Power Equipment Customer Relations 

Department of American Honda Motor Co., Inc. at the following address:

Exclusions:

1. Any damage or deterioration resulting from the following:

- Neglect of the periodic maintenance as specified in the product owner’s manual

- Improper repair or maintenance

- Operating methods other than those indicated in the product owner’s manual

- A low fluid level or the use of fluids other than specified by Nikkari.

- Exposure of the product to soot and smoke, bird droppings, sea water, salt, rain, corrosive chemical agents, or extreme weather conditions 

- Collision, fuel contamination or deterioration, neglect, unauthorized alteration, misuse, incorporation or use of unsuitable attachments or parts 

- Normal wear and tear (including, but not limited to, normal fading of painted or plated surfaces, sheet peeling, and other natural deterioration)

2. Consumable parts: Honda does not warrant parts deterioration due to normal

 

wear and tear. The following parts are not covered by this 

warranty unless they are needed during another repair covered under this warranty: spark plug, fuel filter, air cleaner element, clutch disc, tire, wheel 

bearing, recoil starter rope, cable, belt, cutter blade, oil, and grease.

3. Cleaning, adjustment, and normal periodic maintenance work (blade sharpening, belt and cable adjustments).

4. Any product that has ever been declared a total loss or sold for salvage by a financial institution or insurer. This exclusion does not apply to any recalls 

or other campaigns.

5. Tiller tines of roto-tillers are specifically not warranted against impact damage including, but not limited to, abrasive damage.

Disclaimer of Consequential Damage and Limitation of Implied Warranties:

American Honda disclaims any responsibility for loss of time or use of the product, transportation, commercial loss, or any other incidental or consequential 

damage. Any implied warranties are limited to the duration of this written limited warranty. Some states do not allow limitations on how long an implied 

warranty lasts and/or do not allow the exclusion or limitation of incidental or consequential damages, therefore the above exclusions and limitations may 

not apply to you. This warranty gives you specific legal rights, and you may also have other rights

,

 which vary from state to state.

PRODUCTS COVERED BY THIS WARRANTY:

LENGTH OF WARRANTY: (FROM DATE OF ORIGINAL RETAIL PURCHASE)

PRIVATE RESIDENTIAL

(1)

COMMERCIAL/RENTAL/INSTITUTIONAL

Hand-Held Attachments

SS

ST

 

trimmer

36 months

24 months

SSBL blower
SSCL cultivator
SSET edger
SSHH hedge trimmer
SSPP pole pruner

American Honda Motor Co., Inc.

Power Equipment Customer Relations Dept.

4900 Marconi Drive

Alpharetta, GA 30005-8847       

Telephone: (770) 497-6400

Содержание SSET









































Отзывы: