Nidek Medical LEX-DRILL, Руководство по обслуживанию

Страница: 72 / 94

LHM2A*RDA001A/E
7 - 30
7.5.6 Hole depth
Purpose: Adjusting hole depth
(Internal data for drill adjustment (hole depth)
→
Parameter
→
Parameter setting
→
Hole
depth (V))
Jig: Plastic/flat lens
1. Drill a lens.
1) Press the Polish button while pressing
to call up the internal data for drill
adjustment (holde depth). [Lex 1000]
2) Set a plastic/flat lens in the Lex 1000, close
the lens chuck, and press . [Lex 1000]
3) When lens measurement is completed,
remove the lens and set it in the Lex Drill.
4) Press the START button to drill the lens.
2. Check the number of holes drilled in the lens.
1) When there are seven holes, decrease the
Hole depth parameter by 0.5 and drill a
lens again.
2) When there are no holes, increase the
Hole depth parameter by 0.5 and drill a
lens again.
㧔
Front surface
㧕
Hole 1: Depth -0.3, Auto angle (drilled through)
Hole 4: Depth 0.0, Auto angle (drilled through)
Hole 7: Depth +0.3, Auto angle (drilled through)
The depths of holes 1 to 7 increase from
-0.3 to +0.3 in increments of 0.1.
Internal data for drill adjustment (hole depth)
Hole
There are
seven holes.
There are
no holes.