Nidek Medical LEX-DRILL, Руководство по обслуживанию

Страница: 66 / 94

LHM2A*RDA001A/E
7 - 24
4. If the measured value of L is not 41.0 ±0.1mm, increase or decrease the Drill position (H)
parameter by the value calculated from (41.0 -L)/2. [Lex 1000]
1) Display the Parameter screen. Select
“Parameter Setting” and display “Drill
Parameter 13/15” (see 7.5.1).
2) Press to highlight “Drill position (H)”
and press or to change the set
value.
7.5.3 Horizontal coordinate offset
Purpose: Adjusting the horizontal coordinate offset after adjusting the drill axis and position.
(Internal data for drill adjustment (drill position)
→
Parameter
→
Parameter setting
→
Horizontal coordinate offset)
Jig:Plastic/flat lens, vernier caliper
1. Drill a lens.
1) Press while pressing to call up
the internal data for drill adjustment (drill
position). [Lex 1000]
2) Set a plastic/flat lens in the Lex 1000, close the lens chuck, and press . [Lex 1000]
3) When lens processing is completed, remove the lens and set it in the Lex Drill.
㧗 㧙
.
.
* If L is 41.2 mm, increase the parameter by -0.1.